Draytek Vigor 2200V Installationsanleitung PDF herunterladen (Seite 58)

3-15

Basic Setup & Internet Access

seconds. If you set the time to 0, the PPP session will not

terminate itself.

IP Address Assignment Method (IPCP)

Fixed IP: Check “No (Dynamic IP)” unless your ISP has pro-

vided you with a static IP address.

Fixed IP Address: If your ISP has provided you with a static IP

address enter it here.

Click “OK”.

3.4.2 Using PPTP with a DSL Modem

Click “Internet Access Setup” > “PPTP” to enter the setup page.

The following setup page is just for example. The exact settings should

be provided by your DSL service povider.

PPTP Setup

PPTP Link: Check “Enable” to enable a PPTP client to es-

tablish a tunnel to a DSL modem on the LAN2 interface.

PPTP Server IP Address: Specifies the IP address of the

PPTP-enabled DSL modem. Refer to the user manual of the

PPTP-enabled DSL modem.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 139 140

Keine Kommentare

Draytek Vigor 2200V Installationsanleitung Seite 58