Draytek Vigor3300 Series Bedienungsanleitung PDF herunterladen (Seite 70)

DrayTek/qos/outgoing> class -e 1 upload 15

DrayTek/qos/outgoing> class -s 1

Index: 1

Class Name: upload

Bandwidth: 15

2.4.2.3 filter

This command can set outgoing filter table for QoS function.

Filter -s <Index>

Filter -e <Index> <SrcAddr> <SrcMask> <DstAddr><DstMask> <STStatus>

Filter -d <Index>

Syntax Description

-s It is used for displaying current settings.

-e It is used for editing the settings of specified item.

-d It is used for deleting the settings of specified item.

Index Enter the number (from 1 to 10) of outgoing class that you want to

set for specific configuration.

SrcAddr Enter the source IP address to be applied for this filter.

SrcMask Enter the subnet mask value (/24 ; /16 ; /8 ; /25 ; /26 ; /27 /28 ;

/29 ; /30 ; /31 ; /32) for the source IP address to be applied for this

filter.

DstAddr Enter the destination IP address to be applied for this filter.

DstMask Enter the subnet mask value (/24 ; /16 ; /8 ; /25 ; /26 ; /27 /28 ;

/29 ; /30 ; /31 ; /32) for the destination IP address to be applied for

this filter.

STStatus It is used for specifying if service type, protocol will be

configured. Ener the number (0,1 or 2) to specify service type

status.

0: Basic (Only the Service Type field is allowed to be

configured.);

1: Advanced (The Protocol and Port fields are allowed to be

configured.);

2: None (No field is allowed to be configured.)

ServiceType There are thirty-five service types provided here. The available

number that you can enter is 0 ~ 35.

Protocol Enter the number (0,1 or 2) to specify protocol.

1: TCP ; 2: UDP; 3:TCP/UDP

Source Port Start Enter the number (1 ~ 65535) as the source port start for this

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 122 123

Keine Kommentare

Draytek Vigor3300 Series Bedienungsanleitung Seite 70