Draytek Vigor3300 Series Bedienungsanleitung PDF herunterladen (Seite 71)

filter.

Source Port End Enter the number (1 ~ 65535) as the source port end for this filter.

Destination Port Start Enter the number (1 ~ 65535) as the destination port start for this

filter.

Destination Port End Enter the number (1 ~ 65535) as the destination port end for this

filter.

DSCPStatus Enter the number (0,1 or 2) to specify DiffServ CodePoint status.

0: Basic (Only the DiffServ CodePoint Type field can be

configured) ;

1: Advanced (Only the DiffServ CodePoint field can be

configured);

2: None (No field is allowed to be configured)

DSCPType There are twenty-one types supported. The available number that

you can enter is 0 ~ 21.

DSCP Enter the number (by hex mode) to be applied for incoming filter.

FilterTo Enter the number (1 ~ 8) to choose a filtering condition to be

applied.

Example

DrayTek/qos/outgoing> filter -s 1

-------------------

QoS outgoing Filter

-------------------

Index: 1

Source IP Address:

Source Mask:

Destination IP Address:

Destination Mask:

Service Type Status: Basic

Service Type: AUTH(TCP:113)

Protocol:

Source Port Start:

Source Port End:

Destination Port Start:

Destination Port End:

DSCP Status: Basic

DSCP Type: BE

DSCP:

Filter to:

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 122 123

Keine Kommentare

Draytek Vigor3300 Series Bedienungsanleitung Seite 71